Skip to product information
1 of 5

NEW! GX-Diver's 44mm Cobalt 2.0 Blue Silicone

NEW! GX-Diver's 44mm Cobalt 2.0 Blue Silicone

LIMited edition to 1000 pieces

EMPTY DOM REMOVE PROTECTOR
EMPTY DOM REMOVE PROTECTOR
Regular price $1,425.00 AUD
Regular price $0.00 AUD Reduced price $1,425.00 AUD
Limited Time Sold out

Estimated Shipping Widget will be displayed here!

EMPTY DOM REMOVE PROTECTOR
QUESTIONS? CLICK TO TEXT US
EMPTY DOM REMOVE PROTECTOR
EMPTY DOM REMOVE PROTECTOR
View full details

The Deep Runs Cobalt

Our flagship diver, upgraded. The GX-Diver's 44mm Cobalt 2.0 pairs a deep cobalt wave dial that shifts as the light moves across it with a high-polish blue ceramic bezel, polished steel hands and a flash of orange on the second hand. Underneath, the Swiss-made La Joux-Perret G100 automatic runs a 68-hour power reserve, and the solid 316L steel case is water-resistant to 300 meters.

Specifications

Swiss Movement

Swiss Movement

This watch runs on the La Joux-Perret G100, a newer-generation Swiss automatic built in La Chaux-de-Fonds. Its standout feature is a 68-hour power reserve. Take it off Friday night, and it's still running Monday morning.

The G100 has 24 jewels and beats at 28,800 vph for a smooth, sweeping seconds hand. It includes hacking seconds and a date. It's finished to a soigné standard with Côtes de Genève striping, visible through the exhibition caseback.

Accuracy is rated at ±5 seconds per day, tighter than most movements in its class.

  • Caliber: La Joux-Perret G100
  • Jewels: 24
  • Frequency: 28,800 vph (4 Hz)
  • Power reserve: 68 hours
  • Finish: soigné, Côtes de Genève
  • Accuracy: ±5 sec/day
Dimensions & Wrist Size

Dimensions & Wrist Size

Case Dimensions

  • Case Diameter: 44.0 mm
  • Case Thickness: 12.9 mm
  • Lug-to-Lug: 52.0 mm
  • Lug Width: 23.0 mm
  • Weight (on bracelet): 108 g

Wrist Fit

  • Leather strap: 6.5 to 8.75 in (16.5 to 22.2 cm)
  • Rubber strap: 6.5 to 9.5 in (16.5 to 24.1 cm)
  • Bracelet: 6.5 to 10.5 in (16.5 to 26.7 cm)

Not sure of your wrist size? Check out our Know Your Wrist Size Guide.

Case & Bezel

Case & Bezel

The 44mm Cobalt 2.0 is built on a solid, rugged case of surgical-grade 316L stainless steel with a brushed finish, left unplated so raw steel frames the dial. The 120-click unidirectional bezel carries a scratch-resistant high-polish blue ceramic insert inlaid with BGW9 Swiss Super-LumiNova, so it stays sharp by day and glows at night. An anti-reflective sapphire crystal sits on top, the skeleton case back is fastened with actual screws for a secure seal, and the case is water-resistant to 300 meters.

  • Solid, brushed 316L steel case
  • 120-click blue ceramic bezel
  • Screwed skeleton case back
Dial & Hands

Dial & Hands

The 44mm Cobalt 2.0 wears a deep cobalt blue multi-layer wave sandwich dial, its textured top plate stacked over a sun-brushed center for real depth. Every hand-applied index is filled with BGW9 Swiss Super-LumiNova. The sword-shaped hour and minute hands are polished steel with lumed centers, and the orange second hand cuts across the cobalt with every sweep.

  • Deep cobalt wave dial
  • Polished steel lumed hands
  • Orange second hand
Water Resistant to 300 Meters

Water Resistant to 300 Meters

300m Water Resistance, Screw-Down Crown

This watch is water-resistant to 300 meters (30 bar), so it's built for swimming, snorkeling, and recreational scuba diving, as well as everything on land.

The screw-down crown threads tightly into the case and presses against a gasket to seal out water, dust, and pressure. Screw it in snugly after setting the time, and the case stays sealed.

  • Water resistance: 300m / 30 bar / 1,000 ft
  • Suitable for: swimming, snorkeling, recreational diving
  • Crown: screw-down, with gasket seal
Scratch-Resistant Sapphire Crystal

Scratch-Resistant Sapphire Crystal

Sapphire Crystal, Front and Back

Both crystals are synthetic sapphire, rated 9 out of 10 on the Mohs scale, second only to diamond. Keys, zippers, and desk edges won't scratch either side.

The anti-reflective coating goes on the inside only, front and back. Outer coatings smudge and wear, so the surfaces you touch stay pure sapphire. You get a glare-free view of the dial and the movement.

  • Material: synthetic sapphire, front and back
  • Hardness: 9 out of 10 on the Mohs scale
  • Coating: anti-reflective, inside only
  • Outer surfaces: uncoated, for full scratch resistance

Swiss Craftsmanship

Hand-crafted by Swiss watchmakers with generations of expertise in precision time.