GX-Diver's 41mm Rose Cobalt Fusion

This watch runs on the Swiss Sellita SW200-1 in Elaboré grade, a step above the standard version. It's regulated in three positions with tighter tolerances. Its 26 jewels and 28,800 vph beat give you a smooth, sweeping seconds hand and stable timekeeping, along with hacking seconds, a quickset date, and a minimum 41-hour power reserve when fully wound.

Behind the exhibition caseback, the custom LIV rotor winds the movement with every move of your wrist.

Every movement is individually tested before casing and ships with its own accuracy certificate. This one recorded -5 seconds per day, well within the Elaboré standard of ±7.

• Caliber: Sellita SW200-1 Elaboré
• Jewels: 26
• Frequency: 28,800 vph (4 Hz)
• Power reserve: 41 hours minimum
• Rotor: custom LIV design
• Accuracy certificate: -5 sec/day

Case Dimensions

• Case Diameter: 41.0 mm
• Case Thickness: 12.9 mm
• Lug-to-Lug: 48.0 mm
• Lug Width: 22.0 mm
• Weight: 90.7 g

Wrist Fit

• Leather strap: 6.25 to 8.5 in (15.9 to 21.6 cm)
• Rubber strap: 6.25 to 9.25 in (15.9 to 23.5 cm)
• Bracelet: 6.2 to 10.5 in (15.7 to 26.7 cm)

Not sure of your wrist size? Check out our Know Your Wrist Size Guide.

The 41mm Rose Cobalt Fusion starts with a solid, rugged case of surgical-grade 316L stainless steel, then takes on its warm rose gold tone through our Rose Gold Fusion process, with the color fused into the steel so it will never come off under normal wear and tear. The 120-click unidirectional bezel carries a scratch-resistant polished blue ceramic insert inlaid with BGW9 Swiss Super-LumiNova, so it stays sharp by day and glows at night. An anti-reflective sapphire crystal sits on top, the skeleton case back is fastened with actual screws for a secure seal, and the case is water-resistant to 300 meters.

• Rose Gold Fusion over 316L steel
• 120-click blue ceramic bezel
• Screwed skeleton case back

The 41mm Rose Cobalt Fusion has a four-layer 3D cobalt blue dial. Its wave-textured top layer carries a stenciled 12 and 6 that reveal the BGW9 Swiss Super-LumiNova beneath, and the sun-brushed blue center pops whenever it catches light. Every index is hand-applied in a rose gold housing and filled with five layers of BGW9. The hour, minute and second hands are all rose gold, with lume on the hour and minute hands.

• Four-layer 3D cobalt dial
• Rose gold index housings
• All rose gold hands

Sapphire Crystal, Front and Back

Both crystals are synthetic sapphire, rated 9 out of 10 on the Mohs scale, second only to diamond. Keys, zippers, and desk edges won't scratch either side.

The anti-reflective coating goes on the inside only, front and back. Outer coatings smudge and wear, so the surfaces you touch stay pure sapphire. You get a glare-free view of the dial and the movement.

• Material: synthetic sapphire, front and back
• Hardness: 9 out of 10 on the Mohs scale
• Coating: anti-reflective, inside only
• Outer surfaces: uncoated, for full scratch resistance